上一篇主題 :: 下一篇主題 |
發表人 |
內容 |
ek
註冊時間: 2009-04-11 文章: 866
|
發表於: 星期二 四月 21, 2009 3:13 pm 文章主題: FILTER 窿的疑惑 |
|
|
想問fresh的無壓filter跟krups代理的無壓filter是否一樣呢 ?因為我在krups代理
買回來的無壓filter,發覺filter窿比較大,在落粉,登粉及tamp粉時,都有些粉從filter
底走出來,而射啡方面未有改善,但在每次清洗filter時,都發覺到有些窿都塞了
咖啡渣,好似kick住唔上唔落咁,所以我至懷疑個filter唔知係唔係大o左 D ,至會
有D咖啡渣KICK住,而壓力又將 d 咖啡渣射出黎,因為射完啡停機後,杯及周圍,都
有好多咖啡渣
請問fresh的無壓filter窿是不是細 d 呢 ?
krups代理買的無壓filter

4020跟機的壓力filter

舊stream機 krups espresso mini filter(無壓)
  |
|
回頂端 |
|
 |
pillowpaky
註冊時間: 2007-11-24 文章: 696
|
|
回頂端 |
|
 |
ek
註冊時間: 2009-04-11 文章: 866
|
發表於: 星期三 四月 22, 2009 3:58 pm 文章主題: |
|
|
這是給大家比較吓個filter窿的大細 !
但 fresh 的 filter 窿大細跟代理的 filter 窿的大細是一樣嗎 ?
ek 在 星期三 四月 22, 2009 4:11 pm 作了第 1 次修改 |
|
回頂端 |
|
 |
mtx-4
註冊時間: 2009-03-23 文章: 35
|
發表於: 星期三 四月 22, 2009 4:10 pm 文章主題: |
|
|
I think they are identical. Don't worry. |
|
回頂端 |
|
 |
pillowpaky
註冊時間: 2007-11-24 文章: 696
|
發表於: 星期四 四月 23, 2009 3:13 pm 文章主題: |
|
|
ek 寫到: | 這是給大家比較吓個filter窿的大細 !
但 fresh 的 filter 窿大細跟代理的 filter 窿的大細是一樣嗎 ? |
因為我的認知,Fresh的Filter就是代理訂的 _________________
http://pillowpaky.blogspot.com/ |
|
回頂端 |
|
 |
mtx-4
註冊時間: 2009-03-23 文章: 35
|
發表於: 星期四 四月 23, 2009 3:23 pm 文章主題: |
|
|
My recent finding is, fresh bean and good grind setting should give you a good flow and extraction without 射啡. |
|
回頂端 |
|
 |
shing Site Admin

註冊時間: 2006-03-01 文章: 1100
|
|
回頂端 |
|
 |
mtx-4
註冊時間: 2009-03-23 文章: 35
|
發表於: 星期四 四月 23, 2009 3:38 pm 文章主題: |
|
|
Thanks Shing gor for his expert endorsement. |
|
回頂端 |
|
 |
ek
註冊時間: 2009-04-11 文章: 866
|
發表於: 星期四 四月 23, 2009 3:44 pm 文章主題: |
|
|
我唔該你o地咁多位至真 !  |
|
回頂端 |
|
 |
denis_chan
註冊時間: 2009-03-12 文章: 36
|
發表於: 星期五 四月 24, 2009 6:02 am 文章主題: Re: FILTER 窿的疑惑 |
|
|
ek 寫到: | 想問fresh的無壓filter跟krups代理的無壓filter是否一樣呢 ?因為我在krups代理
買回來的無壓filter,發覺filter窿比較大,在落粉,登粉及tamp粉時,都有些粉從filter
底走出來,而射啡方面未有改善,但在每次清洗filter時,都發覺到有些窿都塞了
咖啡渣,好似kick住唔上唔落咁,所以我至懷疑個filter唔知係唔係大o左 D ,至會
有D咖啡渣KICK住,而壓力又將 d 咖啡渣射出黎,因為射完啡停機後,杯及周圍,都
有好多咖啡渣
請問fresh的無壓filter窿是不是細 d 呢 ?
krups代理買的無壓filter

4020跟機的壓力filter

舊stream機 krups espresso mini filter(無壓)
  |
如果真係大, 係邊度買都一樣,
反而可能係個模有問題
不過, 我想知到底自己有冇做錯步驟
因為4月中ge個一批filter(係fresh買), 好像冇人係度提出有咁ge問題(我有 ) |
|
回頂端 |
|
 |
denis_chan
註冊時間: 2009-03-12 文章: 36
|
發表於: 星期三 四月 29, 2009 11:44 am 文章主題: |
|
|
今日係landy度買豆ge時候, 順便試埋個filter, 一對比原來新同舊係有分別
而新個d個hole真係大d |
|
回頂端 |
|
 |
mtx-4
註冊時間: 2009-03-23 文章: 35
|
發表於: 星期三 四月 29, 2009 1:45 pm 文章主題: |
|
|
Thanks for the information. But very little we can do now. No one can ensure the next batch will be back to the original size. |
|
回頂端 |
|
 |
mtx-4
註冊時間: 2009-03-23 文章: 35
|
發表於: 星期三 四月 29, 2009 1:56 pm 文章主題: |
|
|
Further exam with mine (bought from dealer) to that from pillowpaky (in the photo), the size of the holes looks very similar. The number of holes is definitely the same. Yes I counted them I doubt the manufacturing tolerance could be that big considering all other fit and finishing are very good. |
|
回頂端 |
|
 |
denis_chan
註冊時間: 2009-03-12 文章: 36
|
發表於: 星期三 四月 29, 2009 2:09 pm 文章主題: |
|
|
mtx-4 寫到: | Further exam with mine (bought from dealer) to that from pillowpaky (in the photo), the size of the holes looks very similar. The number of holes is definitely the same. Yes I counted them I doubt the manufacturing tolerance could be that big considering all other fit and finishing are very good. |
pillowpaky個filter同landy 用梗ge好似唔一樣 |
|
回頂端 |
|
 |
pillowpaky
註冊時間: 2007-11-24 文章: 696
|
發表於: 星期四 四月 30, 2009 6:40 am 文章主題: |
|
|
denis_chan 寫到: | mtx-4 寫到: | Further exam with mine (bought from dealer) to that from pillowpaky (in the photo), the size of the holes looks very similar. The number of holes is definitely the same. Yes I counted them I doubt the manufacturing tolerance could be that big considering all other fit and finishing are very good. |
pillowpaky個filter同landy 用梗ge好似唔一樣 |
我那個也是在Landy那裡買,一樣是代理貨
而LAndy那個好似係在另一台Kurps得來的
不過好似好耐之前因為filter嚴重缺貨,都比人買埋
而家用緊邊個我都唔知 _________________
http://pillowpaky.blogspot.com/ |
|
回頂端 |
|
 |
|